[The link bar feature is not available in this web]

Accessories for Shaft Alignment Systems
 ModelPart #DescriptionPrice  USD*
Printer for LaserMTP-1 PRINTER5700-200Portable Thermal Printer, Battery-powered, AC adapter, communications cable, (1) roll of thermal paper Call
MTP-2 Thermal Paper5700-210(2) Rolls of Thermal Paper for MTP-1 Printer Call
MPT-6 Thermal Paper5700-211(6) Rolls of Thermal Paper for MTP-1 Printer Call

Software for Laser Shaft Alignment

Easy-Laser Link5700-220Windows software, null modem cable, instruction manual Call
Thin Chain Bracket5700-302Aluminum, 7/16th" wide chain bracket, includes chain.
If you need a PAIR order this Part number twice.
 Call

Thin Magnetic Bracket5700-303Aluminum, 7/16th" wide embedded magnets bracket, If you need a PAIR order this Part number twice. Call
 Extension Cable5700-310 Analog (Black) (5 m) 16.4 foot extension cable, (1) each  Call
 Extension Cable5700-301Digital  (Red) (5 m)16.4 foot extension cable, (1) each Call
Sliding Bracket for Laser Shaft AlignmentSliding Bracket5700-304Aluminum Bracket with four adjustable leg contacts for non-rotating shafts (1 each) Call

Magnetic Block Base5700-305Replacement Block for D-500 and D-510, 2 1/2" x 2", on/off switch Call


click to enlarge image

Offset Bracket5700-306Aluminum, 2 5/16" square with tapped holes for mounting risers (PAIR) Call
 Risers (set of 4)5700-308Replacement 2.5"x 0.5" (60 x 10mm) Stainless Steel drilled & tapped Call
 Risers (set of 4)5700-309Replacement 9.5"x 0.5" (240 x 10mm) Stainless Steel drilled & tapped Call
  PRICES SUBJECT TO CHANGE WITHOUT NOTICE.